Decorative traverse rod with exposed finials and fascia. Available in Designer Metals™, Wood Trends™, and Wrought Iron. Pleated or Ripplefold™ headers, one-way or split draw, wall or ceiling mount, AMP™ motorization compatible.
Standard pinch-pleat, euro pleat, goblet pleat. 16mm ball-bearing wheeled carriers. Smooth operation for most drapery weights.
Ripplefold™ Carriers
Wave/ripple-fold drapery. Snap-tape or wheeled Butt Master carriers. Specify fullness: 60%, 80%, 100%, or 120%.
Ripplefold™ fullness
60%
Minimal wave
80%
Moderate wave
100%
Standard — recommended
120%
Full lush wave
Rod is ordered with either slides (for pleated) or Ripplefold™ carriers — specify when ordering. Both types use 16mm ball-bearing wheels for smooth, quiet operation.
4
Draw type
Two-Way / Split Draw
Two panels meet in the center and open to both sides. Most common for windows and doorways.
One-Way Right
Single panel travels entirely to the right side. Good for corner windows or one-sided stack.
One-Way Left
Single panel travels entirely to the left side.
AMP™ motor is compatible with both one-way and two-way draw. Draw direction must match motor adapter (Right or Left motorhead).
5
Mount type
Wall Mount
Standard. Brackets attach to wall above window. Adjustable projection 3¼"–4¾".
Ceiling Mount
Track mounts to ceiling. Flat ceiling bracket included. Good for floor-to-ceiling or room dividers.
Double Rod
Two rods at different projections — sheer behind, drapery in front. Requires double bracket.
6
Track length
Enter the finished track length — the total width the rod will span, including returns if outside mount. Min 18" · Max 192" (16 ft). Tracks over 96" (8 ft) include one splice and keystone.
Track length
inches
or
In feet
ft
Quantity (rods)
Room / window label
Track length—
Splice required—
Brackets needed (est.)—
Max fabric weight64 lbs total / 4 lbs per ft
Est. stackback—
7
Finials
Standard (pair)
Select a collection first to see available finials.
8
AMP™ Motorization
Not motorized
Manual operation
Cord draw, baton draw, or hand-traverse. No motor needed.
AMP™ Motor specs: DC 16.5V · 2.55Ah · 7.8 in/sec · 1.2Nm torque · UL/CE certified · White only · 6ft power cord (non-extendable — plan outlet location) · Dual battery + AC (works during power outage)
Critical rules: One motor per rod only · Max 64 lbs on motorized rod · Cannot bend or curve the track when motorized · Max track length 16 ft (same as manual)
Motor draw side
Motor Right
Motor at right end — adapter #84531025 (Motorhead Adapter Right)
Motor Left
Motor at left end — adapter #84532025 (Motorhead Adapter Left)
Control accessories (select all that apply)
RF Remote — White (#62101000)
15-channel · pairs to multiple rods
RF Remote — Black (#62101010)
15-channel
Surface Mount Wall Switch (#62109000)
Mounts on wall surface
Flush Mount Wall Switch (#62108000)
Installs in standard electrical box
USB Bridge / Gateway (#62102000)
Alexa · Google Home · SmartThings · Control4 · Crestron · IFTTT
15" Cable Extension (#1026660)
For outlet near rod end
4' Cable Extension (#1026661)
Short extension
10' Cable Extension (#1026662)
Medium extension
20' Cable Extension (#1026663)
Long extension — plan ahead
9
Accessories (optional)
None
All accessories are finish-matched unless noted. Specify quantity in notes.
10
Fabric weight check (optional)
Max 64 lbs total, 4 lbs per ft. Use this to verify your fabric is within spec before ordering.
Yards of fabric
Fabric width (in)
oz / sq yd
11
Get your custom quote
Delivery or pickup?
📦
Ship to me
UPS or FedEx from Huntingdon Valley, PA
🏠
I'll pick up
Address confirmed after order
Shipped via UPS or FedEx.
Tariffs and import fees additional.
Pickup in Huntingdon Valley, PA. Address confirmed after order.
Specification submitted! Your email app opened with the complete spec. We'll follow up within a few hours. Urgent? (609) 742-1720 · 24/7.
Minimum track: 18" · Maximum track: 192" (16 ft)
Max fabric weight: 64 lbs total · 4 lbs per linear foot
Tracks over 96" (8 ft) include 1 splice + 1 keystone
Cannot bend or curve the track when motorized (AMP)
One AMP™ motor per rod only — never two
Unfinished finish NOT available on Estate™ Traverse Rods (stationary poles only)
AMP™ motor power cord is 6 ft non-extendable — plan outlet location accordingly
Bracket spacing: end brackets + first center within 24" of stack end, then 48" intervals
10-year warranty on hardware · 7 years on operational cords · 5 years on motorization